BSS -Case Serie Instrucciones De Uso página 25

Battery connection (option)
Never connect 230V mains voltage to the battery connection. There is danger to life!
Do not connect any other low volt-
ages than the permissible 12V-14.4V
DC voltage to the battery connection.
(Image 19) BSS case USB charging socket
(Image 20) BSS case battery connector
Do not connect batteries that do not meet these requirements. There is a risk of over-
heating, short circuit and fire.
Voltages greater than 14.4V can damage or destroy the control electronics in the BSS
case.
Overload safety fuse - over-voltage protection
(Image 21) LED & fuse on the frontside of an
ATEM Extreme Case
DE
EN
FR
IT
ES