Powr-Flite Rigel Pro Manual De Instrucciones página 18

ATTACHMENT CLEANING
Adjusting The Suction
Power For Tool Cleaning
On the back of the vacuum, locate
the suction control dial and turn it
to the desired position. This reduces
the suction power coming through
the hose. Close the suction control
dial when finished to restore full
suction power.
WARNING: PV100-W14-U
There is no way to turn the brushroll off.
Therefore, when using the cleaning tools
it is important to keep your vacuum from
running in the same spot for a period of
time, as carpet or flooring damage could
result. If you need to keep the vacuum in
the same spot for a period of time, such
as at the base of the stairs when cleaning
the stairs, place something, like a flattened
cardboard box, under the vacuum to
prevent damage to the floor.
18