Publicidad
Idiomas disponibles
Idiomas disponibles
TERMOENCOLADO SALKI
may cause damage to the tool and put yourself in danger.
20. If the cable is damaged, it must be replaced by either the manufacturer or a technical service center
recommended by the distributor, which is qualified in any case to perform this work to avoid any risk.
21. Before connecting the appliance, make sure that the voltage and current are adequate.
Save these instructions to consult if necessary.
ADDITIONAL PRECAUTIONARY MEASURES
1. Be extremely careful when handling a hot-melt gun that is plugged in, since high temperatures can cause
serious burns and even unintended fires. Do not touch the nozzle or leave the hot-melt gun unattended while
it is plugged in or hot.
2. Protect the hot-melt gun from prolonged exposure to the sun, fire, water and/or moisture.
3. This hot-melt gun operates ONLY with the hot-melt glue sticks recommended by the manufacturer/dealer.
4. Before cleaning/storing the hot-melt gun, make sure that it is unplugged and at room temperature.
5. This tool must be placed on its stand when the trigger is not being pressed during pre-heating, while
cooling or repositioning or preparing the parts to be glued.
MODEL DESCRIPTION / TECHNICAL DATA
Ref.
Description
85001010
25W DETAIL GLUE GUN
85001020
40W ESSENTIAL GLUE GUN
85001030
40W LOW TEMP GLUE GUN
85001040
60W ADVANCE GLUE GUN
85001050
80W INTENSIVE GLUE GUN
85001060
80W CORDLESS GLUE GUN
1 Nozzle*
2 Flexible stand*
3 Trigger*
4 Base support
5 Cord entry
6 Grip
7 Glue stick tube
8 ON/OFF switch*
*It might be different depending on the glue gun model.
Special
V
-
220V-240V
-
220V-240V
Low temperature
220V-240V
-
220V-240V
ON / OFF
220V-240V
ON / OFF without cable
220V-240V
1
2
16
Hz
W
~
50
8W (MAX. 25W)
~
50
13W (MAX. 40W)
~
50
13W (MAX. 40W)
~
50
14W (MAX. 60W)
~
50
15W (MAX. 80W)
~
50
15W (MAX. 80W)
6
3
8
4
5
Pre-heating
Max. Temp ºC
5-7 min
170º +/- 10º
5-7 min
170º +/- 10º
3-5 min
140º +/- 10º
3-5 min
180º +/- 10º
3-5 min
180º +/- 10º
3-5 min
180º +/- 10º
7
Publicidad
