Aigo R6933 Manual Del Usuario página 9

How to set language?
The default language of the machine is English, please follow the steps below to switch to other languages:
1. The recording interface is displayed by default when power on,
press the "Next" until the "Settings" interface is displayed.
2 .Press the "Power" button to enter the setting page, press the "Next" until the "Language" option is selected,
press the "Power" button to enter.
3. And then select the language that suits you, press "Power" button to confirm and return to "Settings" interface.
How to set time and date?
1. Press the "Previous" to choose "Time And Date", then press the "Power" button to enter.
2. Choose "Time Set", then press the "Power" button to enter, press the "Previous/Next" button to set hour.
3. After that, press the "Menu" button to jump to the minute setting interface, then press the "Previous/Next" button
to set minute. Press "Power" button to confirm and return to the previous interface.
The date setting is the same as the above time setting method.
Press the "Vol/Back" button to return to the previous interface.
Format and reset: Formatting the recorder and resetting recorder.
Recorder information: Checking version, software's date
07