Titanwolf 305360 Manual Del Usuario página 14

5.1 General profile settings
• Restore everything: With the button "RESTORE" it is possible to
reset the settings of all profiles to the factory settings.
5.2 Configuring the profiles
The options, which are explained in detail below, can be individually configured
and saved for each of the profiles. Select the profile which you want to change at
the bottom of the window using the mouse. You can also set that a specific profile
should be loaded at program start. To do this, save the profile you want to use via
"Save". Then click on "+", enter the profile name exactly as you saved it and select
the program link. Finally, click on "Apply" to apply the settings.
5.2.1 General
• Lightning: In this menu, you can adjust the light effects individu-
ally. You can choose between continuous light and pulsating light
(breathing). These can be configured according to your wishes.
• DPI settings: In this menu, you can configure the DPI levels and
the corresponding DPI values.
14
English