BYK byko-spectra Instrucciones De Uso página 12

Connecting the byko-spectra to a Power Supply
Connecting the byko-spectra to a Power Supply
Switch Board Operating Controls
Operating the Switch Board
12
Before connecting the line cord to a power supply
outlet, check the electrical rating on the byko-
spectra product identification plate, to ascertain
that your byko-spectra has the same electrical
power rating as the source of supply.
A Sequence Button (Yellow)
B Ultraviolet Source (UV) On-Off Button
C Store Light (TL84) Source Button
D Daylight (D65) Source Button
E Home Light (Incandescent Illuminant A) Source
Button
F Store Light (Cool White Fluorescent) Source
Button
G Power Off Button (illuminated when unit is
plugged in) (Red)
H ColorGuard II
®
When the unit is plugged into a power source,
the red OFF button (G) is illuminated. To select
a light source simply press the desired button.
When a source is selected the appropriate green
button will illuminate to verify your selection.
Pressing a different source button will turn on the
selected source and turn off the original source.
Lamp Timing Center