Publicidad
Idiomas disponibles
Idiomas disponibles
DISC PLAYBACK
Camera Angle
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
1
Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press the ANGLE button repeatedly to select your
desired angle.
1 / 8
2 / 8
8 / 8
NOTE:
• If the "ANGLE ICON" setting is "OFF" in the Others
menu, the (
) will not appear (refer to page 25).
Picture Control
Picture Control adjusts Brightness, Contrast, Color, Gamma
Correction and Sharpness of the specific display.
1
During playback, press the
MODE button.
2
Press the Cursor buttons
(K or L) to switch among items.
3
Press the ENTER button or the Cursor buttons (sor B)
to adjust the selected item to a desired level.
• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be selected.
4
To return to normal playback, press the RETURN
button.
NOTES:
• The default settings for all items in Picture Control are "0".
• The setting display will disappear in 10 seconds of no use.
• This function cannot be used during Dialog Speed
(refer to page 21).
• If you return all items to the default settings, select
2
"INITIALIZE" at step
Stereo Sound Mode
1
Press the AUDIO button repeatedly during playback to
select your desired sound mode.
STEREO - both right and left channels are active (stereo)
L-ch
- only left channel is active
R-ch
- only right channel is active
STEREO
L-ch
R-ch
NOTE:
• Stereo sound mode will not be changed when playing
DTS CD.
DVD
) mark appears on the screen.
Angle 1
Angle 2
Angle 8
DVD
BRIGHTNESS
s +1B
.
CD
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
Virtual Surround
DVD
You can enjoy stereo phonic virtual space through your exist-
ing 2 channel stereo system.
1
During playback, press the
MODE button repeatedly until
the Virtual Surround setting
appears.
2
Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3
Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or lower the volume if the
sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than "STEREO" (for Audio CD
playback only).
• This function cannot be used during Dialog Speed
(refer to page 21).
Black Level Setting
Adjust the Black Level Setting to make the black parts of the
picture as bright as you prefer.
1
During playback, press the
MODE button repeatedly until
Black Level setting appears.
2
Press the ENTER button to switch ON/OFF.
ON (Default) : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
3
Press the RETURN button to exit.
NOTE:
• This function cannot be used during Dialog Speed
(refer to page 21).
– 22 –
CD
MP3
WMA
OFF
DVD
ON
EN
Publicidad
