6. Fasten the Drawer Back Panel (I) to the Drawer Side Panels (J and K) with four 38 mm Screws (6). Make
sure that Drawer Bottom Panel (L) fits securely into the groove of the Drawer Back Panel (I).
7. Turn the assembled drawer upright. Attach the Handle (10) to the pilot holes on the Drawer Front (H)
with two 12 mm Flat Head Screws (7).
All manuals and user guides at all-guidesbox.com
Utility Drawer Assembling
I
K
H
K
8
L
J
L
I