Descargar Imprimir esta página

FIORENTINI C63F1 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ING. O. FIORENTINI
- For cleaning or servicing the cleaner or when replacing parts, the motor should be switched off and the connecting plug be
withdrawn from the socket.
- Care should be taken to ensure that the connecting calble is not damage by being driven over, crusced, strained, etc.
- The connecting cable should be regularly checked for any signs of damage or ageing.
- The machine must not be used if the conneting cable is not in a proper condition.
- For suction of dry dust, check that the filter are in the vaccum cleaner, also for draw up liquids care to take out the filter from the
vaccum cleaner.
- Do not use foaming chemical.
- Do not clean the vaccum with a water pipe to avoid that water get trought the vaccum head.
1) First operation before use
- Introduce the flex hoses in the hole of the machine until the click insert. Look that the seal ring is on right position.
- Put the accessory that you need on the hoses.
2) Transport
- To avoid damage during the transport by car or by truck, the vaccum cleaner must be put inside his original package.
Take out the plug before any maintenance operation on the head of the machine.
- Clean the vaccum cleaner inside and outside.
- Clean the rubber which is in the cover of the head.
- Check the hoses and the electric cable.
IF LOOSE POWER
- Check the filter.
IMPORTANT: IF YOU CLEAN THE FILTER MICROWEB WITH WATER, WAIT THAT IT IS DRY BEFORE TO
INSERT IN THE VACCUM AGAIN.
FAULT
Motor (suction turbine) does not start
Suction slowly decreases
Suction suddenly decreases
Dust ascapes when cleaning
The general commercial terms and conditions of Ing.O.Fiorentini S.p.A.
The manufacturer can not be held responsible in any way for damages deriving from unauthorized modifications made to the
appliance, for the use of unsuitable brushes and accessories and following a different use of the appliance.
S.P.A.
WARNING NOTE
UTILIZATION
MAINTENANCE AND CLEANING ATTENTION
NORMAL OPERATION OF MAINTENANCE:
TROUBLE SHOOTIN
No electrical power
Filter,nozze,suction hose or extensios tube blocked Check and clean
The paper filtre bag or the tank is full
Filter incorrectly or defective
WARRANTY
CAUSE
REMEDY
Check fuse,cable,plug and socket
Switch off the cleaner and empty
Check filter sealing. Replace filter
6

Publicidad

loading