DFI BLOOD-IRON LanParty BI G41-T33 Manual Del Usuario página 18

E
English
Serial ATA Connectors
Parallel
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.
Chassis Instrusion Connector
Signal
The board supports the chassis intrusion detection function. Connect the chas-
sis intrusion sensor cable from the chassis to this connector. When the system's
power is on and a chassis intrusion occurred, an alarm will sound. When the
system's power is off and a chassis intrusion occurred, the alarm will sound only
when the system restarts.
18
All manuals and user guides at all-guides.com
Parallel
1 2
Ground
1 7
SATA 4 SATA 3
SATA 2 SATA 1