Publicidad
Idiomas disponibles
Idiomas disponibles
11
11D
11F
11F
11E
11E
11 SECURING DECKPLATE & HOSE GUIDE
From underneath sink, secure the Hose Guide (11A) by screwing the Plastic
Locknut (11C). Secure Deckplate (11D) by screwing Wing Nuts (11E) to
Mounting Posts (11F). Hand tighten. Caution: do not over-tighten. Remove
any excess putty from around the outside edge of Deckplate (11D).
12
12A
12C
12 SIDE SPRAY INSTALLATION
Insert the Side Spray Hose (12A) through the Hose Guide (12B). From
underneath sink, feed the Side Spray Hose (12A) back up through the center
hole of sink and through Deckplate (12C) so that it is above the sink.
ENGLISH
11A
11A
11C
12B
4
13
13D
13A
13B
13A
13A
13 HOSE ATTACHMENT
Push Quick Connect Housing (13A), firmly upward onto the Receiving Tube
(13B) located on the back of the Faucet Body (13C), until unable to push any
further. Pull down on the Quick Connect Housing (13A). If the housing and
the Inner Collect (13D) separate slightly but do not pull off, the Receiving Tube
(13B) the connection is secure.
When installing without side spray, a Plug (13F) 972-044 must be used and
is to be ordered separately.
14
14E
14A
14B
14 FAUCET BODY INSTALLATION
With the handle and spout facing forward, carefully install the Faucet Supply
Tubes (14A) through the center hole of Deckplate (14B). Make sure that the Flats
(14D) on the Faucet Body (14E) align with the Flats (14F) on the Deckplate (14B).
13C
13B
13F
OPTIONAL
(Must be ordered
separately)
13A
14E
14D
14F
Publicidad
