Publicidad
IMPORTANT: IT IS IMPORTANT THAT THE ENTIRE
INSTALLATION INSTRUCTIONS BE READ
THOROUGHLY BEFORE PROCEEDING WITH THE
INSTALLATION.
1. INTRODUCTION
Thank you for choosing a Link Integrated Air Kit. We want
to help you get the best results from this suspension and to
operate it safely. This instruction contains information to
assist in the installation for your Link Integrated Air Kit. This
instruction is intended solely for use with this product.
All information in this instruction is based on the latest
information available at the time of printing. Link
Manufacturing reserves the right to change its products or
manuals at any time without notice.
Damaged components should be returned to Link with a
pre-arranged Returned Materials Authorization (RMA)
number through the Customer Service Department. The
damaged component may then be replaced if in
compliance with warranty conditions.
SAFETY SYMBOLS, TORQUE SYMBOL,
2.
and NOTES
DANGER indicates a hazardous
situation which if not avoided, will
result in death or serious injury.
WARNING indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION indicates a potentially
hazardous situation which, if not
avoided, could result in minor or
moderate injury.
NOTICE indicates a potentially
hazardous situation which, if not
avoided, may result in property
damage.
TORQUE indicates named fasteners
are to be tightened to a specified
torque value.
NOTE:
A Note provides information or
suggestions that help you correctly
perform a task.
3. SAFE WORKING PRACTICES
3.1
When handling parts, wear appropriate gloves,
eyeglasses, ear protection, and other safety
equipment.
3.2
Practice safe lifting procedures. Consider size, shape,
and weight of assemblies. Obtain help or the
assistance of a crane when lifting heavy assemblies.
Make certain the path of travel is clear.
4. INSTALLATION GUIDELINES
4.1 The installer must verify the axle is configured
properly for the Integrated air kit being added.
4.2 No alterations of any Link suspension component
is permitted without proper authorization from qualified
Link personnel.
4.3 No welding of any suspension components is
permitted except when specified by Link.
4.4
It is the responsibility of the installer to ensure that
compliance with FMVSS 121 is maintained by the
braking system.
4.5
Proper tightening of fasteners is important to the
performance and safety of the suspension. Follow all
torque specifications throughout the instructions.
Publicidad
