OSENOUS P Serie Manual Del Usuario página 9

* TL vidwo : The camera will take photos at the time interval you set.
These photos will be formed to a video.
Setting of " TimeSetting "
Timer Setting
Timer Setting
Hr : Min
Start : 00 00
Stop : 00 00
Back
MENU OK
Setup the camera outdoor
Once all the setting has been done,the camera is ready for field use:
● Mount the camera about 0.5-2m high with the camera pointed at a
slight downward angle.
● Keep the camera facing north or south NOT east or west due to
sunrise and sunset could produce false triggers and overexposed
images.
●Clear all obstructions in front of camera to avoid obscuring
camera lens or PIR sensor.Otherwise,
triggered by mistake during windy or hot days.
● In order to avoid false triggers,you should adjust PIR sensitivity
depend on the object or wild animals size, the speed and distance
of the movement.
● Make sure that time and date is correct.
● Make sure that the camera's mode switch is "ON" mode(before
you leave).
You can enable it to set a working period for
the camera.It will enter the standby mode if the
time is not within the period.
* If the start time is earlier than the current time,
the setting will take effect the next day.
Select
* If the start time is later than the current time,
the setting will take effect on the same day.
- 8 -
the camera may be