Vissani QR354 Serie Manual Del Usuario página 12

Installation (continued)
Align the bracket against the side edge of the 36 in
(915 mm) cabinet cabinet and the back wall. Draw a line
Slide the bracket inwards and align it against the marked
line. Ensure the rear edge is tight against wall as shown
Use a pencil to mark the location of the 3 center holes as
Set the bracket aside and drill three 7/64" holes in the
Secure the bracket to the cabinet using a Phillips
screwdriver and 3 supplied countersunk wood screws
bracket on the opposite side of the cabinet.
QR354 (SERIES)
Fig. 17-1
Fig. 17-2
Fig. 17-3
Fig. 17-4
EE
12
Center Line
18 in
(457 mm)
7/64"