Publicidad
STEP 5
1. Insert 2 screws (U) through holes on adjustable anchor brackets (P), then tighten to top
board (1).
2. Screw 6 cam bolts (A) into cam bolt holes on top board (1).
STEP 6
1. Attach top board (1) to pre-assembled left side panel (2), right side panel (3) and middle
panel (14) by inserting cam bolts (A) into cam lock holes on the left side panel (2), right
side panel (3) and middle panel (14).
2. Insert 6 cam locks (B) into cam lock holes on left side panel (2), right side panel (3) and
middle panel (14), then rotate clockwise to secure cam bolts (A) in place.
Publicidad
