Publicidad
Idiomas disponibles
Idiomas disponibles
Battery pack over/under temperature
protection is activated
Dirty or damaged contacts on battery pack
or charger
Battery pack
does not charge
Battery pack is at the
end of its life
Charger faulty
EN - 22
This may occur when the saw is run continuously
or exposed to high ambient temperatures. Allow the
battery pack to reach the acceptable temperature
before charging.
Inspect the contacts on the both the battery pack
and charger. If necessary, clean according to the
instructions in this manual. Reinsert battery pack
into the charger, making sure it is fully seated.
All batteries have a limited life. If the battery pack
is more than two years old or has been recharged
frequently, it may be time to replace it. Replace only
with the battery pack specified for this chainsaw.
Have the function checked at an approved service
location.
WWW.SENIXTOOLS.COM
Publicidad
