Sears Kenmore 116.22085 Manual Del Propietário página 6

HOOD
The hood has a built in stop in the upright
bag changing position,
Hinged Area
If the hood is moved beyond the upright bag
changing position it is normal for it to come
off the cleaner.
If the hood should come off, it can be
reassembled by first positioning it on the
unit with the lid release in place and the
hinge tabs on the hood aligned with the
hinge holes on the body. The hinge area on
the hood can be pressed, with the heel of
the hand, to snap the hood back into place.
HOSE
Hose
Latch
Tab
Notch
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place.
To remove: lift
hose latch tab
upward and pull
up on hose.
2. Insert handle into
wand until lock button
snaps in place. Be sure
hose is not twisted.
To remove: press han-
dle release button and
pull up on handle_
To store: Disconnect
hose from wand and
canister to prevent
stress on hose during storage, Store hose
in a loosely coiled position so the hose is
not stressed.
ATTACHMENTS
The individual attachments - crevice tool,
dusting brush and fabric brush - are mount-
ed in the canopy cover of the cleaner. The
individual attachments snap out of the
canopy cover by inserting your finger or
thumb into the wand opening and pulling up.
Dusting Brush
Crevice Toot Fabric Brush
The attachments can be stored by snapping
them down into the canopy with the heel of
your hand.
Other attachments - floor brushes, and
HANDI-MATE JR. _- that do not store in the
canopy cover are generally stored in a con-
venient place in the home.
Attachment use is covered in the ATTACH-
MENTS section.