ABC Design Turbo 6 Instrucciones De Uso página 13

15. Inserting the mattress
Insert the mattress in the cover.
Lay the mattress on the base.
NB: The mattress is wedge-shaped. Make sure that the raised part is at the head end.
16. Fitting the cot on the pram
a. Recline the back of the seat. Position the carrycot on the pram.
b. Fit the carrycot by inserting it in the plastic mounts on both sides.
c. To remove the carrycot from the pushchair, press in the buttons on both sides and pull the carrycot off
away from the pushchair.
17. Fitting the apron
Fit the closed end of the apron over the lower end of the carrycot.
Extend the apron over the cot.
Fasten the press stud on the hood to the press stud on the cot.
Now fasten the press stud on the apron to the press stud on the hood.
18. Universal holder
a.The fittings for the Universal cupholder are located at the points indicated in the picture.
b.The universal fitting can hold ABC Design accessories, such as the ABC Design cupholder, changing bag
and parasol.
EN - 08