Controls
Ensure your Grant digital ultrasonic bath is plugged into a
230VAC fully earthed supply.
Once plugged in, switch on your Grant digital bath via the
power on/off switch at the rear of the unit.
The switch will then illuminate.
The Grant digital bath is operated through a menu driven control system:
KEY 3
KEY 4
KEY 2
KEY 1
The different keys perform the following functions:
KEY 1: – Starts and ends the ultrasonic cycle
KEY 2: Menu – Scroll through the menu
KEY 3: Up/On – Adjust the settings in the options menu
KEY 4: Down/Off – Adjust the settings in the options menu
XUB Series
4
29666 V5
Operating Manual