Publicidad
Idiomas disponibles
Idiomas disponibles
3
While continuing to to pull upward on each Top Side Connector to maintain tension (3a), position additional float
into place (3b).
4
Grab the top of each 1/2" bolt to maintain tension (4a) and lower each Top Side Connector into place (4b). Using
a cordless drill, tighten each 1/2" bolt while maintaining tension (4c). Again, it is important to maintain tension so
each Underside Connector remains in place as you will not be able to access the underside of the Floats.
Note: It is important to use/wear a glove to protect your fingers while holding the bolt up and using the drill.
3a
www.tommydocks.com
3b
4b
4a
4c
Publicidad
