Philips 20PF5320/58 Manual Del Usuario página 84

Connecting peripheral equipment
The television has 1 external socket situated at the back of the set (EXT1) and sockets on the side.
Press the key on the remote control to display
AV
equipment connected to
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.
FM ANT
Video recorder
FM ANT EXT 1
12
EXT1, AV/SVHS, PC, HD
EXT 1 DVI-I In
Carry out the connections shown opposite, using a good quality
euroconnector cable.
DVI-I In
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
and select
Source List TV
or .
Radio
DVI Audio In
or peripheral
Headphone
Audio In
Video In
S-Video
key.
0