Philips 20PF5320/58 Manual Del Usuario página 85

Other equipment
FM ANT EXT 1 DVI-I In
Side connections
HD equipment
FM ANT EXT 1
Computer
FM ANT EXT 1 DVI-I In
FM ANT EXT 1 DVI-I In
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
Make the connections as shown opposite.
With the key, select
AV
For a mono set, connect the sound signal to the AUDIO L (or AUDIO R)
input.The sound automatically comes out of the left and right speakers
of the set.
Headphones
When headphones are connected, the sound on the TV set will be
cut.The
VOLUME -/+
The headphone impedance must be between 32 and 600 Ohms.
DVI-I In
Make the connections as shown opposite.
With the key, select
AV
For more information on using HD mode see page 11.
PC with DVI
Connect the monitor output (DVI) of your computer to the
DVI-I In of the LCD TV. Connect the sound output Audio out of
the computer to the input DVI Audio in of the LCD TV.
PC with VGA
Connect the monitor output (VGA) of your computer via a
VGA/DVI-I cable* to the DVI-I In of the TV. Connect the sound
output Audio out of the computer to the input DVI Audio in of
the LCD TV.
* Not supplied with the set.
For more information on using PC mode see page 10.
Configure the computer on 1024 x 768, 60 Hz for
optimum resolution.
Here is the list of the different display resolutions available on
your TV (depending on version):
640 x 480, 60 Hz
640 x 480, 67 Hz
640 x 480, 72 Hz
640 x 480, 75 Hz
720 x 400, 70 Hz
.
AV/S-VHS
keys are used to adjust the volume level.
.
HD
800 x 600, 56 Hz 1024 x 768, 60 Hz
800 x 600, 60 Hz 1024 x 768, 70 Hz
800 x 600, 72 Hz 1024 x 768, 75 Hz
800 x 600, 75 Hz 1280 x 768, 60 Hz
832 x 624, 75 Hz
13