Costway SY10001 Manual Del Usuario página 8

Adjusting SENSITIVITY
After you become familiar with how your detector works, it's
important to fine tune the sensitivity to get a good effect.
Press MENU to select SENS. Then press or to increase or
decrease the sensitivity. The level will be displayed on the LCD.
Notes:
In order to detect the target deeply buried, you can adjust the SENS
to a high level. But not to set the level of SENS to Max. position, or
the detector will receive interference and false signal from
broadcast antenna and other electronic lines. The detector will have
unstable and irregular indications.
Using BACKLIGHT
In dark area, you can use BACKLIGHT for better searching. Press
backlight button to turn on the backlight.
Note: As the backlight consumes more power, we suggest you turn
off the backlight in normal environment.
Factors That Affect The Detecting
It's difficult to have an accurate detecting result. Sometimes the
detecting may be restricted by some factors:
▪The angle of the target buried in the soil.
▪The depth of the target.
▪The level of oxidization of the target.
▪The size of the target.
▪Electromagnetic and electrical interference surrounding the target.
In area of highly mineralized ground, or fertile ground, or wet sand,
the detector will sound even if there is no metal. In this case, you
can lower the sensitivity or increase the DISC numeric value.
Meantime enhance the distance between the search coil and the
ground. In area with trashy metal, you can set DISC numeric value
to 50. In this case, most nails and small pieces of iron will be
eliminated.
14
CARE AND MAINTENANCE
Your metal detector is an example of superior design and
craftsmanship. The following suggestions will help you care for your
metal detector so you can enjoy it for years.
Handle the detector gently and carefully. Dropping it can
damage circuit boards and cases and can cause the
detector to work improperly.
Use the detector only in normal temperature
environments. Temperature extremes can shorten the
life of electronic devices, damage the cases of the
detector.
Wipe the detector with a damp cloth occasionally to keep
It looking new. Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean the detector.
Keep the detector away from dust and dirt, which can
cause premature wear of parts.
15