Pfeifer RHINO Traducción Del Manual Original página 23

15. Content of the EC Declaration of Conformity
Extract from the original EC declaration of conformity content of the EC Declaration of Conformity according
to Annex II Part A of the EC Machinery Directive 2006/42/EC
We hereby declare that the lever hoist designated below, in its design and construction, and in the version brought
onto the market by us, conforms to the fundamental health and safety requirements of the EC Machinery Directive.
This declaration will be invalidated if the lever hoist is modified without our agreement. The lever hoist may only be
used for the purposes described in the operating manual.
Designation of the machine:
Function:
Serial no:
Year of manufacture:
Applicable EC Directives:
Applied harmonised European standards:
Trade association rules for safety and health at work:
RHINO lever hoist
Lever hoist, hand powered crane
See type plate
from 2022
EC machinery directive 2006/42/EC
EN 13157 Cranes – Safety – Hand powered cranes
EN ISO 12100 Safety of machinery – General principles
for design – Risk assessment and risk reduction
EN ISO 12100 Ber 1 Correction to EN ISO 12100:2011­03
EN 818­7 – Short link chain for lifting purposes –
Safety – Part 7: fine tolerance hoist chain, Grade T
(types T, DAT and DT)
DGUV regulation 054 – tWinches, lifting and pulling devices
Original EC Declaration of Conformity:
➜
www.pfeifer.info/ke
RHINO lever hoist 03/2022 / Subject to change!
11