Genie 3623 EDS Manual Del Usuario página 6

INTRODUCTION
Congratulations on your purchase of the GENIE Digital Scale. This is a precision
instrument designed specifically to provide reliability, durability, and outstanding
performance.
In order to ensure the scale continues to deliver peak performance, please read these
operation instructions carefully and thoroughly prior to initial usage.
IMPORTANT
1. Place the scale on an even surface for a secure stand.
2. The manufacturer does not warrant this unit to be waterproof. Do not expose this
product to rain or moisture.
3. Avoid contact with too much dirt and dust as well as impacts.
4. Do not use the scale under sun or keep it away from heating appliances such as oven,
stove, etc.
5. Be aware of the correct polarity (+/-) when changing the battery.
6. If you do not use the device for a longer period, we suggest taking out the batteries.
7. Use the scale for its intended purpose only.
Note:
The display value may be affected by electromagnetic influences, e.g. when a radio
is operated in the immediate vicinity of the device. The product can be used for its
intended purpose again when the interference is discontinued, but may need to be
switched on again to re-start.
BATTERY INSTALLATION
Attention: Important technical advice for first use!
Please tear off the battery protection.
1. Turn the entire scale upside down and reset it securely on a firm, flat surface.
2. Remove the battery door.
3. Install one "CR2032" battery in the battery compartment, ensuring that the positive side
faces upward.
4. Close the battery door.
BATTERY STATUS
 When the low battery symbol
battery is low. Open the battery compartment and replace the old battery with new ones.
 Used batteries must not be disposed of as household waste. Do not incinerate
batteries because they might explode at high temperature. Contact your local authority
for information concerning reclamation and disposal of batteries.
DIGITAL SCALE
GB
OPERATING MANUAL
appears on the LCD screen, it indicates that the