Winix HumidiPur AW600 Manual De Usuario página 27

Symptom
HumidiPür™ does
not turn on
Function button
is not working
Unpleasant odors
are present
Water level indicator
is on despite water level
Check If:
¢ ¢
Water is ground water.
Water is too cold or icy.
Fan speed is on low
level.
Child-Lock mode is on.
HumidiPür™ is being
used where strong
odors and/or dust is
present
Water is left inside the
water tank.
Solution:
¢ ¢
Change to tap water.
Use 68˚F to 77˚F
temperature water.
Change to high fan
speed.
Push Plasma/Child Lock
button for 3 seconds to
turn OFF Child-Lock
mode.
Replace the water in
the water tank and
change water more
frequently.
Clean water tank and
®
CleanCel
Anti-bacterial Discs.
Refill the water tank.
26