617931-00QP350 Circular Saw NEW
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY QUANTUM PRO TOOL, CALL US TOLL FREE AT:
1-800-544-6986
TRIGGER
SWITCH
RETRACTING
LEVER
LOWER GUARD
4/15/03
1:01 PM
Page 4
QUADRANT KNOB
BEVEL
QUADRANT
SHOE
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electric tools, basic safety precautions
should always be followed to reduce risk of fire, electric shock, and
personal injury, including
the following:
READ ALL INSTRUCTIONS
DOUBLE INSULATION
Double insulated tools are constructed throughout with two
separate layers of electrical insulation or one double thickness of
insulation between you and the tool's electrical system. Tools built
with this insulation system are not intended to be grounded. As a
result, your tool is equipped with a two prong plug which permits
you to use extension cords without concern for maintaining a
ground connection.
NOTE: Double insulation does not take the place of normal safety
precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical
insulation failure within the tool.
CAUTION: WHEN SERVICING USE ONLY IDENTICAL
REPLACEMENT PARTS. Repair or replace damaged cords.
POLARIZED PLUGS
Polarized plugs (one blade is wider than the other) are used on
equipment to reduce the risk of electric shock. When provided, this
plug will fit into a polarized outlet only one way. If the plug does not
fit fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do not change the
plug in any way.
IMPORTANT SAFETY INSTRUCTIONS FOR ALL TOOLS
• KEEP WORK AREA CLEAN. Cluttered areas and benches
invite injuries.
• CONSIDER WORK AREA ENVIRONMENT. Don't expose power