Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTABLE LEVER:
The lever for adjusting the cutting length is located on the left side of the body of the appliance (Fig. 1); this
lever lets you adjust the cutting height to 0.8 mm, 1 mm, 2 mm and 3 mm. 0.8 mm if held upwards, 1 mm if
moved one click towards the rear body of the appliance, 2 mm if moved two clicks towards the rear body of
the appliance, 3 mm if moved three clicks towards the rear body of the appliance.
Fig.1
CLEANING AND MAINTENANCE:
A clean and properly lubricated hair clipper considerably improves its capacity and cutting precision.
DO NOT CLEAN ANY PART OF THE APPLIANCE UNDER RUNNING WATER.
CLEANING THE HEAD:
Before any cleaning operation, make sure that the appliance is properly turned off and disconnected from the
power outlet. Remove the accessory if it is inserted. Using the special brush supplied, remove any hair
residues between the blades and the back of the blade head.
16
Publicidad
