BABYTREND SMART STEPS WK07 B Serie Manual De Instrucciones página 6

ASSEMBLY
Attaching the seat fabric
Connect the seat fabric by
inserting the plastic button
pins into the upper, larger
openings. Then push them firmly
downwards until they SNAP into
position (Fig. 2b).
NOTE: Push the pins from the top
of the opening all the way down
to the bottom.
Insert the pins on the back
of the seat, into the holes by
pushing downwards until it
clicks (Fig. 2c).
5
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
3
Fig. 2b
4
Fig. 2c
Wheels
Place walker on a solid flat
surface with bottom of base
facing upward. Insert the 2
front wheels, 6 stoppers, and 2
rear wheels as shown (Fig. 3).
NOTE: Ensure to apply enough
pressure when inserting the
stoppers so that they push
in lower than the level of all
the wheels. Please check that
wheels are locked into place
before proceeding.
Push Handle
Insert the Push Handle into the
frame. Push in firmly until it clicks
into position.
NOTE: Do Not lift the walker from
the Push Handle (Fig. 4).
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 3
"Click"
Fig. 4
6