Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION (CONTINUED)
15
Remain 1/2
water in the
clean water tank
Pour out the
dirty water
in the Dirty
Water Tank
Air Dry Mode for Brushroll
1. You can manually turn on air-dry mode while the machine is charging. If using
the Self-Cleaning Mode, the machine will automatically turn on the Air-Dry mode
after each Self Cleaning.
2. To manually turn on air dry mode you need to press Mode button while it is
charging. After you turn on the air dry mode, there is voice prompt saying "start
drying brushroll" and the display shows a fan icon. (Fig.16)
3. Air dry function lasts for 4 hours.
4. Air dry mode does not have memory: When it is interrupted, it will restart next
time again with a 4 hour process. It does not have a memory for it being turned
on: when you turn on air dry function, but remove it from charging base and put
it into charging base again, the air dry mode is turned off.
Always Empty the Dirty Water Tank Before Using Self-Cleaning Mode.
Place the machine on the charge base, insert the adapter into the socket, keep at
least 1/2 of the water in the clean water tank, press the self-cleaning button and the
self-cleaning icon on the display screen will flash.
If the voice function is on, the voice will say: start self-cleaning, make sure there is
enough water in water tank. Press any of the On/Off button or mode button or self-
cleaning button to stop self-cleaning, and just return to charging mode or air dry
mode. (Fig.15)
1. Please clean the dirty water water tank before and after the self-cleaning mode.
2. If the dirty water tank is full, the product will not start the self clean mode.
3. Make sure there is more than 25% battery for self-cleaning function.
Press
self-cleaning
button
EN | 16
16
Air dry indicator
Mode
Button
Publicidad
