EINHELL 4511904 Manual De Instrucciones página 2

Converting the rechargeable battery
The rechargeable battery can be converted between:
- 4511904 (4.0 Ah / 72 Wh) --> low stress for the battery resulting in a total service life which is about three
times longer
- 4511905 (6.0 Ah / 108 Wh) --> long running time per battery charge
The rechargeable battery supplied with in 4511904 (4.0 Ah / 72 Wh).
These articles can be converted between each other by entering a code (9-digit chronological key
sequence). To do so, proceed as follows:
Important! Read the instructions in full before you start to convert the rechargeable battery!
1. Press the button for the battery charge level indicator (A) and hold it pressed for about 6 seconds until
the battery starts counting from 1 to 9 in the display (B). Then let go.
2. - To convert from 4511904 (4.0 Ah / 72 Wh) to 4511905 (6.0 Ah / 108 Wh), press the button (A) briefl y
when the fi gure 6 is shown. After this, counting continues as normal up to 9. (Code: 0 0 0 0 0 1 0 0 0)
- To switch over from 4511905 (6.0 Ah / 108 Wh) to 4511904 (4.0 Ah / 72 Wh), press the button (A)
briefl y when the fi gure 4 is shown. After this, counting continues as normal up to 9.
(Code: 0 0 0 1 0 0 0 0 0)
3. Once the sequence has counted up to 9 in the display (B), the capacity of the converted article will be
shown as "6Ah" or "4Ah" for about 2 seconds.
The rechargeable battery has now been converted.
Important! Conversion only takes place if the button (A) is pressed precisely when the digit
4 or 6 appears. This operation is necessary in order to prevent unintended conversion. After
conversion, the rechargeable battery is a diff erent device with a diff erent article number. The new
specifi cations label can be obtained by going to www.einhell.com.
Important! For the Lithium-Ion battery to be allowed to be sent or transported in accordance with
special provision 188, it must be converted to 4511904 (4.0 Ah / 72 Wh)! Defective Lithium-Ion
batteries are not allowed to be sent normally! In this connection, contact King Canada Tools Inc.
Dorval, Quebec · H9P 2Y4 · CA, www.einhell.com
ACTIVE BATTERY MANAGEMENT SYSTEM
The computer-assisted Active Battery Management System permanently monitors and controls all the safety-
related processes of the electrical components and associated hardware. This results in a whole range of
advantages:
•
MAXIMIZED RUNNING TIMES
•
OPTIMIZED TOOL POWER
•
LONGER BATTERY SERVICE LIFE
•
MORE SAFETY
Battery charge level indicator
Press the button for the battery charge level indicator (A) briefl y. The display for the battery charge level
indicator (B) fi rst shows you the charge level in % and the current capacity in succession for 2 seconds each.
Anl_Power_X_Change_4_to_6_SPK7_USA.indb 2 Anl_Power_X_Change_4_to_6_SPK7_USA.indb 2
EN
The corresponding safety information / instructions can
be found in the safety information and original operating
instructions issued for the equipment. Warning! Read all
the safety information and instructions carefully!
A
Description
A - Button for battery charge level indicator
B - Display for battery charge level indicator
B
- 2 -
28.04.2022 10:26:32 28.04.2022 10:26:32