Publicidad
Idiomas disponibles
Idiomas disponibles
A. Blending bowl lid
B. Lid locking system
C. Blending bowl
D. Blending blade
E. Blending button
F. Central button
∙ Power cord:10 A - 250 V
∙ 220-240 V / 50-60 Hz
∙ Steamer: 500 W
∙ Blender: 250 W
A. MEAL PREPARATION
1. Place the appliance on a flat, stable surface. Ensure the appliance
and the power cord (M) are out of children's reach.
2. Ensure the mains power is suitable for the appliance. If it is, plug the
appliance in to the wall outlet.
3. Remove the steamer lid (L), the main bowl (K), the basket (J) and
the cooking water vessel (I) from the apparatus.
4. Remove the blending bowl (C). Fill it with water as per the quantities
shown in the table on page 4.
5. Add the appropriate amount of water to the heating tank (H).
6. Replace the cooking water vessel (I), the main bowl (K). Place the
food into the bowl (K) or into the basket (J). You can use the basket
(J) to cook different foods separately. Put the first food items into
the bottom of the main bowl (K), and then insert the basket (J) with
the other food items in it.
7. Replace the steamer lid (L). Warning: the steamer lid has no
locking system, so avoid touching it when it is heating.
8. Press the cooking button (F) once. An indicator light inside the
button turns on, indicating that cooking has started. Warning:
during cooking, the steamer cover (K) may become very hot
and steam will exit the hole on top of the cover. Keep hands
away to avoid burning yourself.
9. When the cooking cycle is complete, the indicator light turns off and
the appliance turns off automatically.
10. Remove the lid (L). Warning: it is very hot, handle it with care.
11. Allow the bowl (K) to cool for 1 or 2 minutes.
12. Transfer the steamed food to the blending bowl (C). Remove the
liquid collector (I) using the handle and pour the cooking liquid in
the blending bowl (C), see page 5. This will add flavour and vitamins
to baby's food. Warning: the liquid collector (I) is hot. Handle
with care. For better cooking results, we recommend cooking
cereals at the same time as other foods.
13. Replace the blending bowl (C) in the housing. Align and turn the
blending bowl (C) clockwise until it locks in the Nutribaby Glass
base (G).
C. THAWING
Follow the same instructions as for reheating.
• For a 120 ml jar, put 140 ml into the cooking tank (H) during about
fifteen minutes. Then, mix and wait a few minutes so that the jar cools
down to the right temperature.
COMPONENTS
G. Nutribaby Glass base
H. Cooking tank
I. Cooking liquid collector
J. Food separator basket
K. Steamer bowl
L. Steamer lid
INSTRUCTIONS FOR USE
WARNING:
always test food temperature before feeding baby.
NUTRIBABY GLASS • Instructions for use
L.- Power cord
N. Water level indicators
L. ON/OFF button
14. Replace the blending jug (C) on the food processor base (G).
Align and turn the blending bowl cover (A) clockwise, until it locks
into place. The lid is closed properly when the locking system is
snapped securely in its slot. You will hear a click, indicating that
the blending bowl is ready to be used.You will not be able to blend
anything until the lid is properly locked into position.
15. Press the blending switch (E).
Warning: do not blend continuously, but in short bursts of
5 seconds, to avoid overheating the motor. Failure to follow
the blending instructions above may cause the product to
stop working as a safety measure. If the appliance stops,
please let the product cool down for a few moments.
16. When the food is ready, release the blending button (E) and
blending will stop.
17. Unlock the mixing bowl cover (A) and remove the blending bowl
(C) from the base of the Nutribaby Glass (G).
18. You can now feed your baby the freshly prepared meal.
Warning: always test food temperature before feeding baby.
Warning: never blend without food or liquids in the blending
bowl (C). Allow the Nutribaby Glass to cool for at least
15 minutes before using it to cook again.
B. REHEATING
1. Place food to be reheated in a small glass or plastic jar able to
withstand high temperatures. Remove the lid of the jar.
2. Place the small jar in the main bowl (K) and attach and close the
lid (L).
3. Depending on the quantity to be heated, put between 10 to 20 mL of water
(2 to 4 teaspoons) into the cooking tank (H).
4. Press the cooking button (F).
5. When reheating is complete, the indicator light will turn off. Carefully
remove the jar to avoid burning yourself.
6. Pour the food in a dish, stir the contents well to ensure an even
temperature, baby's meal is ready!
• For a 240 ml jar, put 180ml into the cooking tank (H). Then, mix and
wait a few minutes so that the jar cools down to the right temperature.
13
Publicidad
