Urmet 1168 Guía Rápida De Uso página 8

CALLING USING A NUMERICAL, LOGICAL OR TOPOLOGICAL
CODE
The following screen appears when the button is pressed at the icon
display or any numeric or alphabetic key on the keypads. Pressing the button
corresponding to the
Enter the calling code associated with the user you want to call.
The button at the
to delete errors.
If no characters are present this button will go back to the Home Page.
Press the shortcut menu
The message shown by the side will appear and a voice message will be heard
if the line is busy or the apartment station is being used in another conversation.
"THE LINE IS BUSY.
Furthermore, the LED corresponding to the symbol
of the module) will light up in red.
Press the button next to the
The message shown here by the side will appear and the respective voice
message will be heard if the apartment station does not reply within 60 seconds.
"NO ANSWER".
CALL BY MEANS OF BLOCK CODE
The following screen appears when the button is pressed at the icon
display or any numeric or alphabetic key on the keypads. Pressing the button
corresponding to the
Enter the calling code associated with the user you want to call.
The button at the
delete errors. If no characters are present this button will go back to the Home
Page.
Pressing the button
Press buttons and
The button corresponding to the
page.
Press the button at the icon
8
icon to go back to the Home Page.
icon or "X" button on the keypad module can be used
to all the viewed user.
icon to all the user again.
icon to go back to the Home Page.
icon or "X" button on the keypad module can be used to
opens the block selection page.
to select the block of the user to be called.
icon allows you to return to the previous
to send the call.
on the
(present on the front panel
on the
DS1168-034A