Urmet 1168 Guía Rápida De Uso página 9

CALL TO SWITCHBOARD
After pressing the button at the icon
into contact with the operator.
Conversations and busy conditions are managed in the same way as in calls
by means of codes.
OPENING THE DOOR USING A DOOR CODE
The page shown by the side will appear after pressing the button next to icon
or button on the keypad Ref. 1168/46.
Pressing the shortcut button next to the
Then, enter the door opener code and press
The digits entered will be hidden by an equal number of * signs.
Press the shortcut button next to the
the one next to the
OPENING THE DOOR USING A TRANSPONDER KEY
Pass the transponder key near the reader on the key reader module Ref. 1168/45.
If a door code is configured in the system, enter the code after passing the key.
The following page will appear.
Press the shortcut menu next to the
next to the icon to open the gate.
SPECIAL CODES
To send a special code, press the button corresponding to icon
The screen shown at right appears on the display.
Enter the special code, then confirm by pressing the
MAINTENANCE
Use a soft damp cloth to clean the front panels. Do not use products containing alcohol or window cleaning
products.
DS1168-034A
you can call the switchboard and be put
icon to go back to the Home Page.
icon to open the gate. Similarly, press
icon to open the door.
icon to open the door. Press the button
to confirm.
.
button.
9