Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
Please read and follow all the safety instructions below and on the product before
connecting the camera to a power source. Failure to comply with the safety instructions
may result in fire, electric shock, or personal injury, and could affect the safety features
contained in the unit. Please retain all safety instructions.
•
All accessories and cables must be removed before transporting the camera.
•
Do not grasp the camera head when transporting the camera.
•
Always use the remote control to turn the camera head. Do not turn the camera
head by hand. You risk mechanical damage.
•
When turning the camera, make sure that there are no obstacles within the camera's
turning range.
•
The camera may only be operated with the power pack supplied.
•
Do not expose the camera to direct sunlight or to damp, greasy or dusty places or
where the camera could come into contact with rain, smoke or steam.
•
Never expose this equipment or its components to rain or moisture to reduce the
risk of fire or electric shock.
•
Do not drop the camera.
•
Do not spill liquids on the camera.
•
Do not place sources of open flames, such as lit candles.
•
Do not use the camera in extremely bright conditions for long periods of time.
•
The camera must not be used in the vicinity of strong electromagnetic radiation, e.g.
televisions and radio transmitters. The specific frequency of electromagnetic fields
can affect the camera image.
•
Use the supplied power cable. Connect the power cable to a socket with a
protective earth connection. It is recommended to use a multiple socket outlet with
surge protection. The wall sockets must not be overloaded.
•
The camera must not be installed in places subject to mechanical vibrations.
•
The camera must not be placed on an unstable surface. This could result in
serious personal injury and camera damage. When mounting the camera on a tripod,
make sure that you follow the manufacturer's instructions. Use only the mounting
materials recommended by the manufacturer.
•
When unplugging the power cable, hold the plug and not the cable.
•
Make sure that no one steps on the power cable especially at the power socket, or
at the connection point to the camera
•
Unplug the camera if you will not be using it for a long period of time.
•
The camera must not be used outside the specified temperature,humidity and
1
Publicidad
