FH 5038
these instructions must be surrendered to the new
owner!
Safe positioning
The heater must not be located immediately below a socket outlet.
•
Only use the fan heater when it is standing in a horizontal position. Do not place the heater on
•
instable surfaces, such as bed, carpets etc. and do not use the heater on uneven position, where
the heater can tip over – otherwise there is a risk of fire.
The heater should be placed with a minimum distance from flammable objects, walls, structure etc.
•
A safe area to be left free is 100 cm at the front and at the sides and 100 cm at the top. The
appliance opening must not be obstructed in any way.
For your own safety and that of others: water and electricity are a dangerous combination! Do not
•
use this heater in a bathroom or near a swimming pool. Ensure that the appliance cannot fall into
water (bath wash basin, shower cubicle, etc.)
Please read also the safety information before using.
•
Do not use the heater on extremely deep-pile carpets!
•
INSTALLATION
The appliance requires no installation, it should be used solely as a portable appliance. Portable
appliances are not suitable for use in a bathroom.
OPERATION
Turn the thermostat (right) in a clockwise direction until it reaches the maximum setting.
Only ventilation: turn the knob to setting
-
Heating at reduced power: turn the knob to setting I (1000 W)
-
Heating at full power: turn the knob to setting II (2000 W)
-
Switch off: turn the knob (left) to setting modo O.
-
14