Metra AXVI-9005 Guia De Inicio Rapido

Mercedes accessory and NAV output CAN
• Provides accessory (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired AXSWC harness included (AXSWC sold separately)
• High level speaker input
• USB updatable
FREIGHTLINER
Sprinter
MERCEDES
C Class
CLK Class
Caution: Metra recommends disconnecting the negative battery terminal before beginning
any installation. All accessories, switches, and especially air bag indicator lights must be
plugged in before reconnecting the battery or cycling the ignition.
*Note: Refer also to the instructions included with the aftermarket radio.
• Connect the Yellow wire to the radio's 12-volt battery or memory wire.
• Connect the Black wire to the radio's ground wire.
• Connect the Red wire to the ignition wire of the aftermarket radio.
• Connect the Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the Orange wire.
1-800-221-0932
REV. 1/21/20
INSTAXVI-9005
AXVI-9005
Interface 2005-up
FEATURES
APPLICATIONS
2014-up
2005-2011
2005-2009
Connections to be made
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
E Class
G Class
GLK Class
R Class
SLK Class
Sprinter
metraonline.com
2010-up
2007-2012
2010-2012
2006-2011
2005-2011
2010-up