Hilti DGH 130-22 Manual De Instrucciones Original página 28

3 Description
3.1 Product overview
3.2 Intended use
The product described is a cordless diamond grinder for dry-grinding, fine-grinding and polishing mineral
materials. Use the diamond grinder only in combination with a dust extractor.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Grinder, diamond cup wheel, pad holder for finishing pad (DLX only), diamond finishing pad (DLX only),
operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Drop detection function
The product has a drop detection function.
If the product detects a drop when in operation, the product automatically shuts down immediately.
If the drop detection function has tripped, switch the product off and then on again.
22 English
1
Spindle lock button
@
On/off switch
;
Buttons for speed stages
=
Adjusting lever for segment opening
%
Guard
&
Battery release button
(
Battery status indicator
)
Battery
+
Pad holder for finishing pad (DLX only)
§
Finishing pad for finishing (DLX only)
/
Installation opening
:
Sealing lip
∙
Flange
$
Diamond cup wheel
£
Quick-release lock nut
|
Height adjustment of the guard
¡
Connector for dust extraction
Q
2359096
*2359096*