Symbols - Ryobi HG600 Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the product better and safer.
SYMBOL
V
A
Hz
min
n o
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may contain
chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash
hands after handling. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your expo-
sure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to
filter out microscopic particles.
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
NAME
Safety Alert
Read Operator's
Manual
Eye Protection
Wet Conditions Alert
Hot Surface
Volts
Amperes
Hertz
Minutes
Alternating Current
No Load Speed
Class II Construction

SYMBOLS

DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Double-insulated construction
5 - English