Byox JOCKEY Instrucciones De Uso página 11

ASSEMBLY STEPS
WARNING! THE SCHEMES AND FIGURES IN THIS INSTRUCTION ARE FOR ILLUSTRATIVE PURPOSES ONLY AND
THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEM.
1.Step 1 – See Figure 1: In order to fix the small foot rest (M) to the frame of the tricycle (A), follow the photos from figure
01. Attach one plastic bushing in the openings in each footrest. Put one screw on each side. Attach the footrest to the tubes.
Align their openings and slide the screws. Fix the screws using a nut, screwdriver and wrench.
2.Step 2 – See Figure 2: Fix the bottom tube of the parent control handle to the tricycle frame.
3.Step 3 – See Figure 3: Take the front fork (L) and attach to it the front mudguard. Fix the mudguard using screw. After
that attach the front fork to the front wheel. Using 2 screws and 2 nuts fix the fork to the wheel.
4.Step 4 – See Figure 4: Slide the fork through the opening in the front part of the frame (A).
5.Step 5 – See Figure 5: Attach the black plastic cap for the steering wheel on top of the fork. Attach the steering wheel to
the cap. Align the openings of the steering wheel to those of the cap. Slide 1 screw through those openings and tighten it
using nut and screwdriver, in order to fix the steering wheel.
6.Step 6 – See Figure 6: Place the rear brakes to the frame of the tricycle. Take the rear axles and attach a bushing on
each axle, slide each one of them through the openings in the middle of the rear wheels→ bushing → the opening in the rear
brake(Q) → the opening in the rear part of the frame (А). Tighten the axle using a nut and hexagram.
7.Step 7 – See Figure 7: Attach the control rod to both of the holders on the frame. One of them is attached to the bottom
tube of the parent control handle. The other one is attached to the front fork. Fix the rod using nuts and wrench. If needed
tighten the rod in the middle.
8.Step 8 – See Figure 8: Slide the fixing screw for the seat through the tube as shown on figure 8. attach the seat to the top
of the tube and screw. Tighten the screw in order to fix the seat.
9.Step 9 – See Figure 9: Place the tubes of the backrest in the plastic holders on each side of the seat. Press down until the
spring buttons fix in the openings. Slide the end of the crotch belt through the opening in the upholstery and the seat. Fix it
using the C – shaped plastic fixator.
10.Step 10 – See Figure 10: Place the foot rest (P) to the seat (G). Tighten using the plastic screws.
11.Step 11 – See Figure 11: Attach the fixing screw for the basket as shown on the first step of figure 11. Place the basket
on the holder. Slide the screw through the opening in the basket plate. Fix using the nut and cap. Attach on top of it the
cover.
12.Step 12 – See Figure 12: Before attaching the music tray place batteries in the compartment. Remove one of the screws
from the box and untighten the other in other to open the compartment cover. Place 2 batteries size 1.5V AA in the
compartment. Place back the cover and fix it using the screws. Place the music box on the front of the steering wheel.
13.Step 13 – See Figure 13: Connect the parent control handle to the tube at the bottom of the frame. The spring buttons
must be fixed in the openings of the bottom tube. Put the red bracket in closed position. This way you will fix the parent
control handle to the frame.
14.Step 14 – See Figure 14: Attach the canopy to the backrest – the plastic side holders of the canopy must be attached to
the rails of the backrest. Connect the visor to the canopy.
15.Step 15 – See Figure 15: Place the bottle/ cup holder on the handle.
PRODUCT FUNCTIONS
1.Free Wheel Function – See Figure U1 – turn the red button clockwise or counter clockwise in order to activate/
deactivate this function. When this function is active, if your child turns the pedals, they will not move the front wheel and you
can freely guide the movement of the tricycle using the handle.
2.Rear brakes – See Figure U2 – press them down to fix the rear wheels, when you do not use the tricycle.
3.Adjustable backrest – See Figure U3 –Press the red buttons on each side of the backrest in order to recline it or to put it
in a straight position.
4.Adjustable canopy – See Figure U4: The canopy is with several sections. If there is no need it to be fully stretched, fold
one section by attaching the small belt on the top of the canopy to the small buckle.
5.360° Rotating seat – See Figure U5 – Lift the big footrest. In the base of the seat you will find the red button "PULL". Pull
it towards you and holding it pulled turn the seat in 180° so that your child is facing you. Lower the footrest. After that pull up
the red button of the handlebar and in the same time fold the handlebar. Place the backrest in the most reclined position,
6.Adjustable parent control handle – See Figure U6 – In order to lift up or lower it – press the pop – up buttons at the
back of the handle and place the handle in the desired position. Make sure the buttons are fixed in the corresponding
openings before using the tricycle.
7.Folding the steering wheel – See Figure U7 – Before turning the seat in position the baby to look at you, you must fold
the steering wheel. Press the red button down and in the same time bend the steering wheel. After that turn the seat.
8.Footrest for bigger children – See Figure U8 – If you are not using the footrest for bigger children, you can fold it and
pull it towards the frame. Slide the black button downwards and pull the footrest towards the frame as shown in the figure.
9.Music tray – The tray is supplied with button for various melodies and button for lights. Use 2 not rechargeable alkaline
1,5V AA batteries in order to activate the music/ light functions.
10