Publicidad
Idiomas disponibles
Idiomas disponibles
1 To adjust the highest quantity setting, press and hold the icon of the drink you want to adjust for 3
seconds.
-
The upper light of the drinks quantity icon and the upper light of the milk quantity icon (specific types
only) starts to pulse and the start/stop
programming mode.
2 Press the start/stop
-
The start light lights up continuously at first. When the machine is ready to store the adjusted volume,
the start/stop light starts to pulse.
3 Press the start/stop
-
In case of cappuccino or latte macchiato, first the milk will be dispensed. Press the start/stop
when the cup contains the desired milk quantity. The machine automatically starts dispensing the
coffee. Press the start/stop
After you have programmed the new highest default quantity for a drink, the machine will dispense this
new amount each time you select the highest quantity of this drink.
You can only adjust the highest default quantity level.
If you want to go back to the default quantity settings, see ' Restoring factory settings'.
Adjusting the coffee temperature
Machines without temperature icon
1 Press the on/off button to switch off the machine.
2 When the machine is switched off: press and hold the coffee quantity icon until the lights in this icon go
on (Fig. 19).
3 Tap the quantity icon to select the required temperature: normal, high or max.
-
Respectively 1, 2 or 3 lights are on.
4 When you have finished setting the coffee temperature, press the start/stop
5 Press the on/off button to switch on the machine again.
If you do not switch off the machine yourself, it will switch off automatically after some time.
Machines with temperature icon (EP3221 only)
1 Tap the coffee temperature icon repeatedly to select the desired temperature.
Restoring factory settings
The machine offers you the possibility to restore the drinks default settings at any moment.
You can only restore the default settings when the machine is switched off.
1 Press the on/off button to switch the machine off.
2 Press and hold the espresso icon for 3 seconds.
-
The middle lights in the drink setting icons light up. The start/stop light starts to pulse, indicating that the
settings are ready to be restored.
3 Press the start/stop
4 Press the on/off button to switch on the machine again.
button starts to pulse, indicating that you are in
button. The machine starts to brew the selected beverage.
button again when the cup contains the desired quantity of coffee or milk.
button again when the cup contains the desired quantity.
button to confirm you want to restore the settings.
English
button
button.
11
Publicidad
