Publicidad
Idiomas disponibles
Idiomas disponibles
7.
Lower the blade unit into the motor unit.
8.
Turn the blade unit clockwise to lock it into the motor unit (Fig B).
9.
Turn the speed control to the speed you want (1 = low, 2 = high).
10. Turn the speed control back to 0 to turn the motor off.
11. Turn the blade unit anti-clockwise to unlock it.
12. Once finished, lift the bottle off the motor unit, turn it upright, unscrew the blade unit then
screw the lid onto of the bottle.
13. Flip the cap on the lid open to pour, press it closed to store.
USING THE COOLING TUBE
The cooling tube helps to keep your drink cooler and fresher for longer.
1.
Open the cooling tube screw cap and fill the tube with water to the MAX mark on the tube.
2.
Replace the screw cap.
3.
Place the cooling tube in the freezer (or freezer compartment of your fridge) until the water
inside has frozen.
4.
Once frozen, screw the cooling tube into the underside of the lid (FIG B)
5.
Follow the previous instrctions to make your drink and once made, fit the lid and cooling
tube to the bottle. Remember, when using the cooling tube only fill the bottle up to the
cooling tube MAX marking (
CARE AND MAINTENANCE
1.
Unplug the appliance.
2.
Wipe the the motor unit with a damp cloth.
3.
Remove the seal with something blunt, like the handle of a fork.
4.
Hand wash the removable parts.
5.
Press the seal back into place with something blunt, like the handle of a fork.
¬ You may wash these parts in the top rack of a dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes. The damage should be cosmetic only, and should not affect the operation of the
appliance.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances,
appliances and rechargeable and non-rechargeable batteries marked with
one of these symbols must not be disposed of with unsorted municipal
waste. Always dispose of electrical and electronic products and, where
applicable, rechargeable and non-rechargeable batteries, at an appropriate
official recycling/collection point.
).
MAX
4
Publicidad
