Descargar Imprimir esta página

Turbosound TLX LIVERPOOL Serie Guia De Inicio Rapido página 5

Publicidad

8
TLX LIVERPOOL SERIES
11.
其他的重要信息
¼ '' TS
13.
14.
15.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
法律声明
12.
MUSIC Group
MIDAS, KLARK TEKNIK, LAB GRUPPEN,
LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC,
TC HELICON, BEHRINGER, BUGERA
MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2017
保修条款
music-group.com/warranty
16.
17.
2000
Welcome
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information about this or any other product, please visit our
website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit, please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim.
DDA
Please retain all packaging in case of future return shipment.
System Requirements
TLX43 and TLX84 are bi-amp 2-way loudspeakers. Operation (full range or with a subwoofer) requires 2 amplifi er channels and 2 controller channels, one for low
frequencies and one for high frequencies. The input signal is divided between the low frequency and high frequency driver in the controller and the individual
amplifi ed signals are fed to the speaker input. Typically 4 loudspeakers can be run from 2 amplifi er channels by wiring speakers in parallel.
TLX212L and TLX215L subwoofers require 1 amplifi er channel and 1 controller channel. The required fi lters and conditioning is applied to the signal in the controller
and the individual amplifi ed signals are fed to the speaker input.
Correct controller settings for operation of all models and subwoofers can be downloaded from turbosound.com, and are also available as presets for the LAKE LM series
controllers and LAB GRUPPEN DSP amplifi ers.
To avoid wasting amplifi er power, you should use heavy-duty speaker cable with a minimum wire size of 2.5 mm2 (14 AWG), and preferably 4 mm2 (12 AWG) for longer runs or
where total cabinet input impedance is less than 8 ohms. For extreme cable lengths, be aware of cable impedance and resistive losses.
Always observe the correct polarity.
Quick Start Guide
9

Publicidad

loading

Este manual también es adecuado para:

Tlx215lTlx212lTlx84Tlx43