Publicidad
16
TLX LIVERPOOL SERIES
Subwoofer Time Alignment
TURBOSOUND TLX LAKE DSP settings include user
1)
adjustable delays on TLX43, TLX84, TLX212L and
TLX215L channels.
For example: If the fronts of the TLX43 & TLX212L
are aligned then in both pre-sets the delay should
be set to the default which is 0ms.
However in the real world it is not always possible
to have your fl own array and your ground stacked
bass aligned in the vertical plane.
1) In the picture to the right the TLX212L bass is
'forward' of the TLX43 fl own array. So the TLX212L
needs to be delayed .
2) In the picture to the right the TLX43 fl own array
2)
is now 'forward' of the TLX212L ground stacked
bass . So the TLX43 array needs to be delayed.
So how do you fi nd the correct delay time to align
the fl own array to the ground stacked bass?
Some basic knowledge of delay units can get you
an acceptable result by measuring the distance
between the fronts of the fl own array and the front
of the ground stacked array. Remember within
LAKE software you can choose the delay unit;
ms, m or feet.
1 ms (milliseconds) = 0.343 m (meters) =
1.125 ft (feet)
Further fi ne tuning can be done by using one of the
many industry standard measurement software
systems, reference microphones and sound-cards.
LAKE software off ers integration to many of these
software systems, further information can be
found at www.labgruppen.com
Technical Specifi cations
TLX43
System
85 Hz – 20 kHz ±3 dB
Frequency response
70 Hz – 20 kHz -10 dB
Nominal dispersion
120° H x 10° V @ -6 dB points
100° H x 10° V @ -6 dB points
LF: 150 W continuous, 600 W peak
LF: 450 W continuous, 1,800 W peak
Power handling (IEC)
HF: 30 W continuous, 120 W peak
HF: 60 W continuous, 240 W peak
LF: 87 dB (1 W @ 1 m)
Sensitivity
HF: 99 dB (1 W @ 1 m)
LF: 109 dB continuous, 115 dB peak
LF: 121 dB continuous, 127 dB peak
Maximum SPL
HF: 114 dB continuous, 120 dB peak
HF: 119 dB continuous, 125 dB peak
LF: 16 Ω
Impedance
HF: 16 Ω
Crossover type
External bi-amp
2 x 4" (102 mm) LF driver
Components
1 x 1" (25.4 mm) HF compression driver
2 x 1" (25.4 mm) HF compression driver
Enclosure
Connectors
2 x Neutrik speakON* NL4
Wiring
Pins 1+ / 1- LF, pins 2+ / 2- HF
163 x 512 x 290 mm
Dimensions H x W x D
(6.4 x 20.2 x 11.4")
Net weight
8.0 kg (17.6 lbs)
Construction
12 mm (½ ") plywood
Finish
Semi matt black paint
Grille
Powder coated perforated steel
Powder coated perforated steel
Flying hardware
Integral variable curvature
Accessories
TLX43-FLB fl y bar
TLX43-RC4 road case
Quick Start Guide
TLX84
TLX212L
TLX215L
67 Hz – 20 kHz ±3 dB
49 Hz - 173 Hz ±3 dB
48 Hz - 150 Hz ±3 dB
58 Hz – 20 kHz -10 dB
38 Hz - 213 Hz -10 dB
40 Hz - 200 Hz -10 dB
Half space
800 W continuous, 3,200 W peak
1000 W continuous, 4,000 W peak
LF: 94 dB (1 W @ 1 m)
98 dB (1 W @ 1 m)
101 dB (1 W @ 1 m)
HF: 101 dB (1 W @ 1 m)
127 dB continuous, 133 dB peak
131 dB continuous, 137 dB peak
LF: 16 Ω
8 Ω
HF: 16 Ω
External bi-amp
—
2 x 8" (203 mm) LF driver
2 x 12" (305 mm) LF driver
2 x 15" (381 mm) LF driver
2 x Neutrik speakON* NL4
2 x Neutrik speakON* NL4
2 x Neutrik speakON* NL4
Pins 1+ / 1- LF, pins 2+ / 2- HF
Pins 1+ / 1- input, pins 2+ / 2- link
Pins 1+ / 1- input, pins 2+ / 2- link
245 x 801 x 485 mm
488 x 576 x 542 mm
506 x 802 x 751 mm
(9.6 x 31.5 x 19.1")
(19.2 x 22.7 x 21.3")
(19.9 x 31.6 x 29.6")
27.9 kg (61.4 lbs)
43.0 kg (94.8 lbs)
65.0 kg (143 lbs)
15 mm (5⁄8") plywood
15 mm (5⁄8") plywood
18 mm (¾ ") plywood
Semi matt black paint
Semi matt black paint
Semi matt black paint
Powder coated perforated steel
Powder coated perforated steel
Integral variable curvature
Integral
TLX84-FLB fl y bar
TLX212L-WHB wheel board
TLX215L-WHB wheel board
TLX84-RC4 road case
TLX43-FLB fl y bar
TLX84-FLB fl y bar
17
Half space
4 Ω
—
Integral
Publicidad
