Filter:
water and should be positioned here 99%
of the time. Water is pumped through the
sand filter, where it is cleaned and returned
to the pool.
A
Backwash:
clean the sand bed; water is pumped down
through the Collector Hub, upwards through
the sand bed, and deposited out of Port D.
A
Drain:
This function drains water from
the pool; another filter bypass setting,
water is pumped and deposited out of
Port D, instead of returning it to the pool.
A
S-S-006103/21.0x28.5cm/58515EU / 530gal 欧规砂滤器说明书/JS-YF-2017-B-03277-英
This function is used to filter pool
C
C
B
This function is used to
C
D
C
B
C
D
C
B
Closed:
flowing between the sand filter and the
pool.
A
Rinse:
This function for initial startup,
cleaning, and sand bed leveling after
Backwash; water is pumped downwards
through the sand bed, up through the
Collector Hub and deposited out of the
valve Port D.
A
Circulate:
pool water bypassing the sand filter; use
this function if the filter is broken to collect
debris in the Debris Screens.
A
7
This function stops water
C
C
B
C
D
C
B
This function circulates
C
D
C
B