HAMPTON BAY KZH1601AX-01/GW Guía De Uso Y Mantenimiento página 5

Installation (continued)
Attaching the cross bar to
1
the outlet box
□ Screw the mounting screws (CC) into the hole on
the outside of the cross bar (EE) so that the
threads face out.
□ Mount the cross bar (EE) to the outlet box (not
included) using the outlet box screws (BB).
□ Make sure the threads of the mounting screws
(CC) are facing out when the cross bar (EE) is
attached to the outlet box.
Making the electrical
2
connections
□ Wrap the middle of the ground wire from the
fixture around the ground screw (DD) on the
cross bar (EE). Use a wire connector (AA) to
connect the end of the ground wire from the
fixture to the ground wire from the outlet box.
□ Use a wire connector (AA) to connect the white
wire from the fixture to the white wire (neutral
wire) from the outlet box.
□ Use a wire connector (AA) to connect the black
wire from the fixture to the black wire (live wire)
from the outlet box.
□ Wrap the three wire connections with electrical
tape for a more secure connection.
□ Position the wires back inside the outlet box.
5
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM