Publicidad
Idiomas disponibles
Idiomas disponibles
ES STATEMENT OF COMPLIANCE (original)
pursuant to:
EP and Council Directive No. 2006/42/EC
EP and Council Directive No. 2014/30/EC
EP and Council Directive No. 2000/14/EC
A. We: Seco Industries, s.r.o., Jungmannova 11, Valdické Předměstí, 506 01 Jičín
ID No.: 05391423
B. Mechanical equipment
- name:
Riding mower
UJ 110
- model:
- serial number: 25,500-50,000
Description:
The UJ110 is a four-wheel self propelled lawnmower with Briggs & Stratton B&S Vanguard 23 HP (3867), B&S 7220 PXi (40U8),
B&S 7220 EXi (40N8), B&S 8240 PXi (44U6) and Loncin LC2P77E engines. The power from the engine is transferred through
an electromagnetic clutch using V-belts to the mowing deck and the travel transmission. The mowing mechanism is in a three-
rotor arrangement with two blades on each rotor at two height levels. The blades are driven by a double-sided V-belt.
C. Legislation forming the basis for assessment of compliance:
ČSN EN ISO 12100, ČSN EN ISO 5395-1,3, ČSN EN ISO 14982:2009
D. Assessment of compliance was performed according to the designated procedure in:
- EP and Council Directive No. 2006/42/EC, Annex VIII (eqv.Annex no. 8, NV No. 176/2008 Coll.)
- EP and Council Directive No. 2014/30/EC, Annex II (eqv.Annex no. 2, NV No. 117/2016 Coll.)
- EP and Council Directive No. 2000/14/EC, Annex VI (eqv.Annex no. 5, NV No. 9/2002 Coll.)
E. Assessment of compliance performed by:
Státní zkušebna strojů a.s. (SZS, a.s.)
Třanovského 622/11, 163 04 Prague 6 Řepy, Czech Republic
F. We confirm that:
- this mechanical equipment meets all respective provisions of the aforementioned directives (NV)
- measures have been taken to ensure the compliance of all products introduced to the market with the technical documentation
and the requirements contained in technical regulations.
- guaranteed emission level of acoustic power LwA is 100 dB(A)
Measured mean values of acoustic power depending on the engine used:
ENGINE
B&S Vanguard 23 HP (3867)
B&S 7220 PXi (40U8), EXi (40N8)
B&S 8240 PXi (44U6)
Loncin LC2P77F
Technical Documentation in the scope pursuant to annex VII for the Directive 2006/42/EC a pursuant to annex VI for the Directive
2000/14/EC is kept at the place of business of the manufacturer at the address:
SECO Industries, s.r.o.
Jungmannova 11
Valdické Předměstí
506 01 Jičín
In Jičín, 1. 2. 2022
Therefore, some technical differences in terminology may appear in this manual when compared with the actual product. No claims can be deduced
from this. Print, duplication, publication and translation (even in part) must not be performed without the written consent of Seco Industries, s.r.o. The
manufacturer reserves the right to change technical parameters of the product, without prior customer notification.
(Government directive NV 176/2008 Coll.)
(Government directive NV 117/2016 Coll.)
(Government directive NV 9/2002 Coll.)
issue the following statement:
Státní zkušebna strojů a.s. (SZS, a.s.), NB 1016
Třanovského 622/11
163 04 Prague 6 Řepy, Czech Republic
Speed (min
Ing. Aleš Housa
Mechanical Engineering Division Director
123
)
Measured value of ac.power [dB(A)]
-1
2900
2900
2900
2900
97
99
99
100
Publicidad
