Publicidad
Idiomas disponibles
Idiomas disponibles
User Guide
Trace menu
1. From the main menu, turn the knob to select menu
item "Trace"
2. Press the knob once to enter the tracing menu.
3. Select a proper value of the tracing voltage.
BC421332622232es-ES0101
DEVItector™ II V2
Setup menu
1. From the main menu, turn the knob to select menu
item "Setup".
2. Press the knob once to enter the setup menu.
3. Turn knob to set the Autostop Current to the
desired value, e.g. 1,00 Ampere.
2022.07 | FEC | ©Danfoss | 13
Publicidad
