Orbegozo CV 4000 A Manual De Instrucciones página 17

CV 4000
Turn on the heating elements by means of HEATER SWITCHES on the side panel. When the

heating elements are on the switches will illuminate. For maximum heat output both switches
should be on.
When the desired room temperature has been reached, the thermostat knob should be turned

slowly anti-clockwise until the thermostat is heard to click off and the lights on the element
switches are seen to go out. After this the heater will keep the air temperature in the room at
the set temperature by switching on and off automatically.

CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to cool down before cleaning.

Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.

Do not use any detergents or abrasives and do not allow any water to enter the heater.

STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust and

stored in a clean dry place.
17