Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

www.qfxusa.com
PBX-2008-1
120V-240V
30W RMS
User Manual for PBX-2008-1 Portable Speaker

Publicidad

loading

Resumen de contenidos para QFX PBX-2008-1

  • Página 1 PBX-2008-1 120V-240V 30W RMS User Manual for PBX-2008-1 Portable Speaker...
  • Página 2 Introduction Congratulations and thank you for your purchase of this QFX Powered Portable PA System with wired microphone, USB & SD Card inputs . To get the most from yoursystem, we recommend you review all the information provided in this instruction Manual.
  • Página 3 PBX-2008-1 PBX-2008-1 REAR PANEL 1. Master Level Control: Turn this knob to adjust the master volume. 2. Treble adjustment: Turn this knob to increase the treble on the LINE/USB/SD/FM inputs 3. Bass adjustment: Turn this knob to increase the bass on the LINE/USB/SD/FM inputs 4.
  • Página 4 PBX-2008-1 PBX-2008-1 FRONT PANEL 1.Antenna is for receiving the FM signal. Before use, pull up the telescopic FM antenna. After use,pack up the FM antenna to better protect it. 2.Voltage Selector 120V-240V. Be sure the unit's voltage in the outlet you are using.
  • Página 5 PBX-2008-1 PBX-2008-1 DISPLAY DIGITAL AUDIO PLAYER DIGITAL AUDIO PLAYER DIGITAL AUDIO PLAYER DIGITAL AUDIO PLAYER 1. Input Mode: The LED display screen will display the information of input mode for USB/SD/ LINE/FM. 2. When a USB flash drive / SD Card is inserted into the USB/SD input, the unit will automatically switch to USB/SD mode and begin playing .mp3 audio files from the USB flash drive / SD Card.
  • Página 6 PBX-2008-1 PBX-2008-1 BATTERY 1. The PBX-2008-1 is a battery powered PA loudspeaker. Be sure that you have completely charged the battery prior to first use to maximize the battery's lifespan. The PBX-2008-1 takes approximately 8 hours to fully charge. The PBX-2008-1 will automatically begin charging once the power cord is connected to a power source and Power Switch is set to OFF.
  • Página 7 PBX-2008-1 PBX-2008-1 REMOTE CONTROL 1.STANDBY: Pulse el botón de modo de espera para que el aparato esté el modo de espera. 2. Botón de modo de entrada: Pulse este botón para cambiar entre las distintas entradas (línea, USB, SD, FM).
  • Página 8 INTRODUCCIÓN Felicidades y agradecemos que usted compre este altavoz portátil QFX con micrófono con cable, entradas USB y tarjeta SD . Para obtener mayor informaciñon de su sistema, le recomendamos que lea todas las informaciones proporcionadas en este folleto de instrucciones.
  • Página 9 PBX-2008-1 PBX-2008-1 VERDADERO PANEL 1. Control maestro: Para ajustar el volumen principal. 2. Ajuste de tiple: Gire este botón para ajustar el treble de LINE/USB/SD/FM. 3. Ajuste de Bombo: Gire este botón para ajustar el bombo de LINE/USB / SD / FM.
  • Página 10 PBX-2008-1 PBX-2008-1 PANEL FRONTAL 1.Antena sirve para recibir la señal de FM. Antes de usar,tire la antena telescópica de FM, después de su uso,regoge bién para que no lo dañe. 2.Elege tención 120V-240V. Asegúrese de que voltaje de altavoz esté utilizando en la...
  • Página 11 PBX-2008-1 PBX-2008-1 MONITOR DIGITAL AUDIO PLAYER DIGITAL AUDIO PLAYER DIGITAL AUDIO PLAYER DIGITAL AUDIO PLAYER 1. Modo de entrada: La pantalla LED mostrará la información de modo de entrada de USB / SD / LINE / FM. 2. Cuando USB flash / tarjeta SD inserta a la entrada de USB / SD, el aparato cambiará...
  • Página 12 PBX-2008-1 PBX-2008-1 BATERÍA 1. PBX-2008-1 es una batería abastecida para altavoz PA. Asegúrese de que haya cargado completamente la batería antes del primer uso con el fin de prolongar la su máxima vida. PBX-2008-1 Necesita arededor de 8 horas para cargarse completamente. PBX-2008-1 comenzará...
  • Página 13 PBX-2008-1 PBX-2008-1 REMOTE CONTROL 1.STANDBY: Pulse el botón de modo de espera para que el aparato esté el modo de espera. 2. Botón de modo de entrada: Pulse este botón para cambiar entre las distintas entradas (línea, USB, SD, FM).